Products

Home / Products / FPR Kerb Drain Deck / BSEN1433 -B125/C250/D400 BRIDGE DRAINAGE SYSTEM CPS

BSEN1433 -B125/C250/D400 BRIDGE DRAINAGE SYSTEM CPS

165mm/190mm/210mm(height)

EN14A33-B125/ C250/D400 grade SMC elevated collection and drainage ditch, this product has the functions of high bridge, bridge water collection and drainage, and is one of the key products in the drainage system. Light weight, large drainage area, smooth surface with good non-slip design, beautiful appearance, the product can have different colors. Anti-aging, high temperature resistance, cold resistance. Avatar's drainage technology is at the international leading level, and its products fill the gap in the world. The quality exceeds that of similar foreign products, with high load capacity and reasonable structural design. Grade C is suitable for conventional viaducts and bridges, please choose Grade D for ports. The system is equipped with a product with a cleaning window and a filter can be added.

Availability:



Inquire PDF Export

Product Description

BSEN1433-B125/ C250/D400 BRIDGE DRAINAGE SYSTEM CPS

High temperature press SMC sheet molding compounds
Non rusting, non discoloration, anti-aging
Certificated Slip Resistant Design

Avatar SMC Performance index

Anti slip pattern

vatar cover of composite access covers achieved a market leading Skid Resistance Value of 89

The table below has been developed from data collected by County

Surveyors Society and illustrates the acceptabable parameters when tested using the TRRL Pendulum Test in general accordance with BS667:part 1:1986

This test provides a slip resistance value(SRV) for each surface tested The higher value the greater slip resistance.

TRRL Pengulum Value	Condition Of Surface
19 and below	Dangerous
20-39	Marginal
40-74	Satisfactory
Adove75	Excelient

UV resistance test

Table 3-1 Ultravioler Test Conditions Standard Source Duration of Exposure ASTM G154

Table 3-1 Ultraviolet Test Conditions

Standard	Source	Duratlon of Exposure
ASTM G154a(Cycle 1)	UVA:340nm	2,160hours
ASTM G154b(Cycle 1)	Xenon Arc:340nm	1,000hours
ASTM G154(Cycle 3)c	UVB:Type313	2,160hours

Results Summary

Average Flexural Strength

Before UV aging

(MPa)

Average Flexural Strength

After UV aging

(MPa)

Average Flexural Strength due to

UV aging(%)

(MPa)

910

820

10

The loss of flexural strength was measured to be approximately 10%

Meet the specifications of BSEN1433-C250oading

28-0

Our Third Party Testing Bodies: LLOYDS BRITISH, ICAS, SGS

Title：SMC COMPOSITE DRAINAGE BRIDGE DRAINAGE SYSTEM CPS
PRODUCT	LENGTH（mm）	WIDTH（mm）	HEGHT（mm）	Weight (Kg)	LOADING (KN)
CPS7101SX	500	175	165	8.3	125
CPS7102SX	500	275	165	11.5	125
CPS7103SX	500	335	165	14	125
CPS7104SX	500	175	190	9.3	125
CPS7105SX	500	275	190	12.5	125
CPS7106SX	500	335	190	15	125
CPS7107SX	500	175	210	10.3	125
CPS7108SX	500	275	210	13.5	125
CPS7109SX	500	335	210	16	125
CPS7201SX	500	175	165	8.3	250
CPS7202SX	500	275	165	11.5	250
CPS7203SX	500	335	165	14	250
CPS7204SX	500	175	190	9.3	250
CPS7205SX	500	275	190	12.5	250
CPS7206SX	500	335	190	15	250
CPS7207SX	500	175	210	10.3	250
CPS7208SX	500	275	210	13.5	250
CPS7209SX	500	335	210	16	250
CPS7301SX	500	175	165	11.5	400
CPS7302SX	500	275	165	14	400
CPS7303SX	500	335	165	20	400
CPS7304SX	500	175	190	12.5	400
CPS7305SX	500	275	190	15	400
CPS7306SX	500	335	190	21	400
CPS7307SX	500	175	210	13.5	400
CPS7308SX	500	275	210	16	400
CPS7309SX	500	335	210	22	400
Remark: The CPS700CQ series product must be equipped with a cleaning window at intervals during installation

Performance index	SMC Bridge Draiage System	Cast iron Bridge Draiage System
Corrosion resistance	Corrosion preventive	Not resistant to corrosion
Appearance	Beautiful appearance,available in different colors	rough
Weight	Light	weight
Deformation amount	small	Themal expansion

Manhole Cover FRP cover kerb drainage trench cable trench

BSEN1433 -B125/C250/D400 BRIDGE DRAINAGE SYSTEM CPS

YOU MAYBE INTERESTED IN...

ABOUT US

QUICK LINKS

PRODUCTS

CONTACT US